This is a method of doing cross stitch on a particular type of fabric which will tear off after the work is done - this way you can cross stitch on any type of fabric, regardless of the fact that the eave is not prominent on the fabric. The way you do it is to keep the waste canvas on the garment and work the design. After the work is done, the waste canvas is pulled away thread by tread, after slightly wetting it. The work will remain on the garment. Soluble canvas will wash away when soaked in warm water.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 77 x 77 stitches
Sewn Design Size: 5.5 x 5.5 inches or 140 x 140 mm
Suggested Material Size: 11.4 x 11.4 inches or 290 x 290 mm
Stitch Style: Cross-stitch Using 2 strands
Make sure your stitches are not too tight. If you pull down the needle too tight, the stitches will look flat, and the Aida fabric may
Of course it is preferable to embroider in natural light: it puts less strain on your eyes, but it does not always work. So try to embroider closer to the lamp.
Try to plan the whole design in advance. Check that you have all the accessories. This is so annoying when the thread is over, when all the cross-stitch project is almost done.
In order to be able to download you need to be logged in. If you still not registered you can do it now.