Ann Logan|Cross Stitch Patterns to Download|Tulip|5057


'Bookmarks' album



Tulip|5057

times 71 Downloaded
Download

There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.

To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 27 x 73 stitches
Sewn Design Size: 1.9 x 5.2 inches or 49 x 132 mm
Suggested Material Size: 7.8 x 11.1 inches or 199 x 282 mm
Stitch Style: Cross-stitch Using 2 strands

Tulip
DMC Threads
Cross Stitch Calculator
27 x 73 stitches 2 colors

Download
If you want to iron your cross-stitch project, set your iron to its lowest "Warm" setting. While ironing place your cross-stitch project on top of two or three smooth towels right side down.
You can use another flat towel to put over the back of the fabric ,to safely iron your cross-stitch design.