There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.
To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 143 x 265 stitches
Sewn Design Size: 10.2 x 18.9 inches or 259 x 481 mm
Suggested Material Size: 16.1 x 24.8 inches or 409 x 631 mm
Stitch Style: Cross-stitch Using 2 strands
A cross stitch has two parts and can be worked in two ways – a complete stitch can be worked, or a number of half stitches may be stitched in one line and then completed on the return journey. Your cross stitch may face either direction but the most important rule is that all the top stitches should face the same direction!
In order to be able to download you need to be logged in. If you still not registered you can do it now.