Tension in your stitching is by far the easiest thing to correct, especially if you’re using a hoop – pull tight but not so tight that you stretch the hole at all. If you stitch in hand you have to be more careful.
I find that pulling the thread mostly through and then using my little finger in the hand holding the needle to “flick” the tail the final bit gives perfect tension and is reproducible for each stitch. Pay attention to the tension you’re applying as, if you stitch in different directions or do “patches” of stitching over the piece, you’ll pull it in weird directions.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 65 x 144 stitches
Sewn Design Size: 4.6 x 10.3 inches or 118 x 261 mm
Suggested Material Size: 10.5 x 16.2 inches or 268 x 411 mm
Stitch Style: Cross-stitch Using 2 strands
Embroidery hoops and frames help to the fabric in right position and to keeping stitching tension even. If it is possible, choose a hoop that will be bigger than your design, this way you will be able to complete the x-stitch project without repositioning the frame over stitched work.
Don't forget to remove your embroidery hoop in between stitching sessions so that your aida fabric does not stretch.
In order to be able to download you need to be logged in. If you still not registered you can do it now.