I assume that you yourself understand this, but still I will say. It is very important to wash your hands before touching the fabric or thread. Of course, you are going to wash the finished cross stitch design, but why make it dirtier?
In case you use a thread or fabric that is hand-dyed wash them in advance so that they do not stain your handwork.
Unwind your thread from time to time. Just leave the needle and let the thread loose - it will unwind itself... Or help it a little to unwind.
Do this every few stitches, otherwise the texture will be uneven and the fabric will show through your stitches too much.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 50 x 50 stitches
Sewn Design Size: 3.6 x 3.6 inches or 91 x 91 mm
Suggested Material Size: 9.5 x 9.5 inches or 241 x 241 mm
Stitch Style: Cross-stitch Using 2 strands
There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.
To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
In order to be able to download you need to be logged in. If you still not registered you can do it now.