There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.
To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 33 x 31 stitches
Sewn Design Size: 2.4 x 2.2 inches or 60 x 56 mm
Suggested Material Size: 8.3 x 8.1 inches or 210 x 206 mm
Stitch Style: Cross-stitch Using 2 strands
Fabric for cross stitch are referenced with the number of stitches possible in an inch. 10- 14 are the best for beginners ; it will be very difficult for a starter to do crossstitch on fabric with 20 or more stitches per inch.
Once you have got a hang of the techniques of cross stitch you can use other fabric to do cross stitch designs like a woven fabric with an even weave . Even weave means the number of threads will be the same per inch horizontally as well as vertically, making perfect squares to do your cross stitch.You get cotton even weave fabric specifically suited for cross stitch in the stores.
In order to be able to download you need to be logged in. If you still not registered you can do it now.