Most designs supposed to be done using two strands of embroidery floss. But the floss is usually sold in six strand packaging.
So before threading your needle, you should separate all the 6 strands.
To do it just cut somewhat about 15”-18” (35 - 45 cm) of the thread. Hold it near the top with one hand allowing the bottom to untwist. Now pull each ply upward with the other hand. Carefully - one at a time.
Combine the necessary number of strands (typically two) and save the remaining for the next usage.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 58 x 138 stitches
Sewn Design Size: 4.1 x 9.9 inches or 105 x 250 mm
Suggested Material Size: 10 x 15.8 inches or 255 x 400 mm
Stitch Style: Cross-stitch Using 2 strands
Make sure your stitches are not too tight. If you pull down the needle too tight, the stitches will look flat, and the Aida fabric may
Of course it is preferable to embroider in natural light: it puts less strain on your eyes, but it does not always work. So try to embroider closer to the lamp.
Try to plan the whole design in advance. Check that you have all the accessories. This is so annoying when the thread is over, when all the cross-stitch project is almost done.
In order to be able to download you need to be logged in. If you still not registered you can do it now.