Pick the color of floss you are starting with and cut a length about 18 inches long. If you go much longer than this, the thread is more likely to get knotted when you stitch.
Most embroidery floss is made up of six strands of thread twisted together. Depending on the fabric you are using, you will typically stitch with only one or two strands at a time.
To separate out a strand, hold the floss with one hand and pinch the end of one strand with the other. Gently and slowly pull the strand up and out until it is separated from the remaining strands. Only pull one strand at a time. Pulling multiple strands may cause the floss to knot.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 225 x 169 stitches
Sewn Design Size: 16.1 x 12.1 inches or 408 x 307 mm
Suggested Material Size: 22 x 18 inches or 558 x 457 mm
Stitch Style: Cross-stitch Using 2 strands
If you want to iron your cross-stitch project, set your iron to its lowest "Warm" setting. While ironing place your cross-stitch project on top of two or three smooth towels right side down.
You can use another flat towel to put over the back of the fabric ,to safely iron your cross-stitch design.
In order to be able to download you need to be logged in. If you still not registered you can do it now.