Most designs supposed to be done using two strands of embroidery floss. But the floss is usually sold in six strand packaging.
So before threading your needle, you should separate all the 6 strands.
To do it just cut somewhat about 15”-18” (35 - 45 cm) of the thread. Hold it near the top with one hand allowing the bottom to untwist. Now pull each ply upward with the other hand. Carefully - one at a time.
Combine the necessary number of strands (typically two) and save the remaining for the next usage.
Material Type: Aida Generic Black
Sewing Count: 14/inch or 55/100mm
Design Size: 49 x 49 stitches
Sewn Design Size: 3.5 x 3.5 inches or 89 x 89 mm
Suggested Material Size: 9.4 x 9.4 inches or 239 x 239 mm
Stitch Style: Cross-stitch Using 2 strands
There are a lot of styles of embroidery hoops and frames. It is your decision whether you use one or not. If you a beginner cross-stitcher perhapse you will prefere to put your fabric in an embroidery hoop. Just don’t pull your fabric too tight or it will distort the weave of the fabric.
In order to be able to download you need to be logged in. If you still not registered you can do it now.