Tension in your stitching is by far the easiest thing to correct, especially if you’re using a hoop – pull tight but not so tight that you stretch the hole at all. If you stitch in hand you have to be more careful.
I find that pulling the thread mostly through and then using my little finger in the hand holding the needle to “flick” the tail the final bit gives perfect tension and is reproducible for each stitch. Pay attention to the tension you’re applying as, if you stitch in different directions or do “patches” of stitching over the piece, you’ll pull it in weird directions.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 65 x 70 stitches
Sewn Design Size: 4.6 x 5 inches or 118 x 127 mm
Suggested Material Size: 10.5 x 10.9 inches or 268 x 277 mm
Stitch Style: Cross-stitch Using 2 strands
When doing the cross stiches on garments the waste canvas is used.
Baste the waste canvas onto the right side of the regular fabric. Work the cross stitches through both layers of fabric. When all the stitching is done, the waste canvas is cut away around the design. Soak the design in water. This will disolve the starch that holds the threads of the waste canvas together. What is left of the waste canvas can then be pulled out from under the stitches, one thread at a time, with a pair of tweezers.
In order to be able to download you need to be logged in. If you still not registered you can do it now.