Pick the color of floss you are starting with and cut a length about 18 inches long. If you go much longer than this, the thread is more likely to get knotted when you stitch.
Most embroidery floss is made up of six strands of thread twisted together. Depending on the fabric you are using, you will typically stitch with only one or two strands at a time.
To separate out a strand, hold the floss with one hand and pinch the end of one strand with the other. Gently and slowly pull the strand up and out until it is separated from the remaining strands. Only pull one strand at a time. Pulling multiple strands may cause the floss to knot.
Material Type: Aida Generic White
Sewing Count: 10/inch or 39/100mm
Design Size: 33 x 38 stitches
Sewn Design Size: 3.3 x 3.8 inches or 84 x 97 mm
Suggested Material Size: 9.2 x 9.7 inches or 234 x 247 mm
Stitch Style: Cross-stitch Using 3 strands
I assume that you yourself understand this, but still I will say. It is very important to wash your hands before touching the fabric or thread. Of course, you are going to wash the finished cross stitch design, but why make it dirtier?
In case you use a thread or fabric that is hand-dyed wash them in advance so that they do not stain your handwork.
Unwind your thread from time to time. Just leave the needle and let the thread loose - it will unwind itself... Or help it a little to unwind.
Do this every few stitches, otherwise the texture will be uneven and the fabric will show through your stitches too much.
In order to be able to download you need to be logged in. If you still not registered you can do it now.