'Angels' album
Purple Angel|1435
times
99
Downloaded
Download
When doing the cross stiches on garments the waste canvas is used.
Baste the waste canvas onto the right side of the regular fabric. Work the cross stitches through both layers of fabric. When all the stitching is done, the waste canvas is cut away around the design. Soak the design in water. This will disolve the starch that holds the threads of the waste canvas together. What is left of the waste canvas can then be pulled out from under the stitches, one thread at a time, with a pair of tweezers.
Baste the waste canvas onto the right side of the regular fabric. Work the cross stitches through both layers of fabric. When all the stitching is done, the waste canvas is cut away around the design. Soak the design in water. This will disolve the starch that holds the threads of the waste canvas together. What is left of the waste canvas can then be pulled out from under the stitches, one thread at a time, with a pair of tweezers.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 44 x 85 stitches
Sewn Design Size: 3.1 x 6.1 inches or 80 x 154 mm
Suggested Material Size: 9 x 12 inches or 230 x 304 mm
Stitch Style: Cross-stitch Using 2 strands
Sewing Count: 14/inch or 55/100mm
Design Size: 44 x 85 stitches
Sewn Design Size: 3.1 x 6.1 inches or 80 x 154 mm
Suggested Material Size: 9 x 12 inches or 230 x 304 mm
Stitch Style: Cross-stitch Using 2 strands
DMC Threads
Cross Stitch Calculator
44 x 85 stitches 14 colors
Download
There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.
To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.