It is tempting to stitch for hours at a time, especially when you can make the time and when you get in the "stitching zone." It is important to avoid this temptation, especially when you are a new stitcher. Taking breaks helps to prevent repetitive stress injuries and eyestrain. Stop stitching, get up, stretch, rest your eyes and hands for a moment, and then start again if you like. If you have trouble with "getting in the zone" and forgetting to take breaks, use a timer. Use the TV schedule or musical selections. When the buzzer, show or CD stops, it is time for a break.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 238 x 319 stitches
Sewn Design Size: 17 x 22.8 inches or 432 x 579 mm
Suggested Material Size: 22.9 x 28.7 inches or 582 x 729 mm
Stitch Style: Cross-stitch Using 2 strands
There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.
To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
In order to be able to download you need to be logged in. If you still not registered you can do it now.