Embroidery hoops and frames help to the fabric in right position and to keeping stitching tension even. If it is possible, choose a hoop that will be bigger than your design, this way you will be able to complete the x-stitch project without repositioning the frame over stitched work.
Don't forget to remove your embroidery hoop in between stitching sessions so that your aida fabric does not stretch.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 127 x 148 stitches
Sewn Design Size: 9.1 x 10.6 inches or 230 x 269 mm
Suggested Material Size: 15 x 16.5 inches or 380 x 419 mm
Stitch Style: Cross-stitch Using 2 strands
Pick the color of floss you are starting with and cut a length about 18 inches long. If you go much longer than this, the thread is more likely to get knotted when you stitch.
Most embroidery floss is made up of six strands of thread twisted together. Depending on the fabric you are using, you will typically stitch with only one or two strands at a time.
To separate out a strand, hold the floss with one hand and pinch the end of one strand with the other. Gently and slowly pull the strand up and out until it is separated from the remaining strands. Only pull one strand at a time. Pulling multiple strands may cause the floss to knot.
In order to be able to download you need to be logged in. If you still not registered you can do it now.