Ann Logan


'Nature' album



Lavender Field|1811

times 163 Downloaded



There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.

To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 223 x 170 stitches
Sewn Design Size: 15.9 x 12.1 inches or 405 x 308 mm
Suggested Material Size: 21.8 x 18 inches or 555 x 458 mm
Stitch Style: Cross-stitch Using 2 strands

Lavender Field
DMC Threads
Cross Stitch Calculator
223 x 170 stitches 24 colors

Download
It can be tempting to leave your cross stitch project attached to the embroidery hoop, either overnight or when it's not in use - but don't! Those hoops are great tools for working, keeping your fabric tight and firm, making the stitch process easier, but they can damage the fabric if they're left inside for long periods of inactivity.
Our advice is to give your project a proper rest - loosen the tension and place your work-in-progress somewhere safe where it won't get damaged or creased.