As you stitch cross stitches, the floss tends to twist and eventually knot. The simple solution is to frequently dangle the needle and floss allowing it to untwist. Once you get into a routine, you will do this without thinking. Until you do, consciously take this step every few stitches.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 65 x 67 stitches
Sewn Design Size: 4.6 x 4.8 inches or 118 x 122 mm
Suggested Material Size: 10.5 x 10.7 inches or 268 x 272 mm
Stitch Style: Cross-stitch Using 2 strands
There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.
To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
In order to be able to download you need to be logged in. If you still not registered you can do it now.