It can be tempting to leave your cross stitch project attached to the embroidery hoop, either overnight or when it's not in use - but don't! Those hoops are great tools for working, keeping your fabric tight and firm, making the stitch process easier, but they can damage the fabric if they're left inside for long periods of inactivity. Our advice is to give your project a proper rest - loosen the tension and place your work-in-progress somewhere safe where it won't get damaged or creased.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 89 x 100 stitches
Sewn Design Size: 6.4 x 7.1 inches or 161 x 181 mm
Suggested Material Size: 12.3 x 13 inches or 311 x 331 mm
Stitch Style: Cross-stitch Using 2 strands
Pick the color of floss you are starting with and cut a length about 18 inches long. If you go much longer than this, the thread is more likely to get knotted when you stitch.
Most embroidery floss is made up of six strands of thread twisted together. Depending on the fabric you are using, you will typically stitch with only one or two strands at a time.
To separate out a strand, hold the floss with one hand and pinch the end of one strand with the other. Gently and slowly pull the strand up and out until it is separated from the remaining strands. Only pull one strand at a time. Pulling multiple strands may cause the floss to knot.
In order to be able to download you need to be logged in. If you still not registered you can do it now.