Ann Logan|Cross Stitch Patterns to Download|Forget-me-Not Flowers|4609


'Flowers' album



Forget-me-Not Flowers|4609

times 156 Downloaded
Download

There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.

To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 47 x 120 stitches
Sewn Design Size: 3.4 x 8.6 inches or 85 x 218 mm
Suggested Material Size: 9.3 x 14.5 inches or 235 x 368 mm
Stitch Style: Cross-stitch Using 2 strands

Forget-me-Not Flowers
DMC Threads
Cross Stitch Calculator
47 x 120 stitches 14 colors

Download
In cross-stitching correct tension is important. Having too strong or too loose of a tension can totally destroy the impression of your project. The threads should be flat against the fabric you are using, but not too tight, so that they are actually pulling the fabric in any way.