'Flowers' album
Flowers|4388
times
83
Downloaded
Download
You can cross stitch on different kinds of evenweave fabric. It may be evenweave linen, Aida cloth, waste canvas etc. It is largely a matter of your personal preference.
Just remember: the number of stitches per inch (or per cm) can drastically change the look of your ready project.
Fabric with a higher stitch will produce smaller and finer designs.
Just remember: the number of stitches per inch (or per cm) can drastically change the look of your ready project.
Fabric with a higher stitch will produce smaller and finer designs.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 81 x 109 stitches
Sewn Design Size: 5.8 x 7.8 inches or 147 x 198 mm
Suggested Material Size: 11.7 x 13.7 inches or 297 x 348 mm
Stitch Style: Cross-stitch Using 2 strands
Sewing Count: 14/inch or 55/100mm
Design Size: 81 x 109 stitches
Sewn Design Size: 5.8 x 7.8 inches or 147 x 198 mm
Suggested Material Size: 11.7 x 13.7 inches or 297 x 348 mm
Stitch Style: Cross-stitch Using 2 strands
DMC Threads
Cross Stitch Calculator
81 x 109 stitches 14 colors
Download
There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.
To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.