Most designs supposed to be done using two strands of embroidery floss. But the floss is usually sold in six strand packaging.
So before threading your needle, you should separate all the 6 strands.
To do it just cut somewhat about 15”-18” (35 - 45 cm) of the thread. Hold it near the top with one hand allowing the bottom to untwist. Now pull each ply upward with the other hand. Carefully - one at a time.
Combine the necessary number of strands (typically two) and save the remaining for the next usage.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 208 x 81 stitches
Sewn Design Size: 14.9 x 5.8 inches or 377 x 147 mm
Suggested Material Size: 20.8 x 11.7 inches or 527 x 297 mm
Stitch Style: Cross-stitch Using 2 strands
Embroidery hoops and frames help to the fabric in right position and to keeping stitching tension even. If it is possible, choose a hoop that will be bigger than your design, this way you will be able to complete the x-stitch project without repositioning the frame over stitched work.
Don't forget to remove your embroidery hoop in between stitching sessions so that your aida fabric does not stretch.
In order to be able to download you need to be logged in. If you still not registered you can do it now.