Pick the color of floss you are starting with and cut a length about 18 inches long. If you go much longer than this, the thread is more likely to get knotted when you stitch.
Most embroidery floss is made up of six strands of thread twisted together. Depending on the fabric you are using, you will typically stitch with only one or two strands at a time.
To separate out a strand, hold the floss with one hand and pinch the end of one strand with the other. Gently and slowly pull the strand up and out until it is separated from the remaining strands. Only pull one strand at a time. Pulling multiple strands may cause the floss to knot.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 160 x 120 stitches
Sewn Design Size: 11.4 x 8.6 inches or 290 x 218 mm
Suggested Material Size: 17.3 x 14.5 inches or 440 x 368 mm
Stitch Style: Cross-stitch Using 2 strands
Make sure your stitches are not too tight. If you pull down the needle too tight, the stitches will look flat, and the Aida fabric may
Of course it is preferable to embroider in natural light: it puts less strain on your eyes, but it does not always work. So try to embroider closer to the lamp.
Try to plan the whole design in advance. Check that you have all the accessories. This is so annoying when the thread is over, when all the cross-stitch project is almost done.
In order to be able to download you need to be logged in. If you still not registered you can do it now.