There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.
To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
Material Type: Aida Generic White
Sewing Count: 70/inch or 278/100mm
Design Size: 65 x 65 stitches
Sewn Design Size: 0.9 x 0.9 inches or 23 x 23 mm
Suggested Material Size: 6.8 x 6.8 inches or 173 x 173 mm
Stitch Style: Cross-stitch Using 1 strand
Many stitchers prefere to use an embroidery hoop or a scrollbar stretcher. Nonetheless, it's still many times the fabric, which is usually made of cotton, eventualy becomes rumpled or wrinkled during the stitching process. Properly ironing the fabric before framing is a quick, easy way of eliminating wrinkles and leaving your cross stitch project looking its best.
In order to be able to download you need to be logged in. If you still not registered you can do it now.