Ann Logan|Cross Stitch Patterns to Download|Flip Flops|3892


'Miscellaneous designs' album



Flip Flops|3892

times 107 Downloaded
Download

There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.

To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 22 x 24 stitches
Sewn Design Size: 1.6 x 1.7 inches or 40 x 44 mm
Suggested Material Size: 7.5 x 7.6 inches or 190 x 194 mm
Stitch Style: Cross-stitch Using 2 strands

Flip Flops
DMC Threads
Cross Stitch Calculator
22 x 24 stitches 3 colors

Download
To find the center of your fabric, fold it in half one way and then fold it in half the other way. Pinch and crease the center point to mark it. You can place a pin in the center or make a small stitch to further mark the center point.