A cross stitch has two parts and can be worked in two ways – a complete stitch can be worked, or a number of half stitches may be stitched in one line and then completed on the return journey. Your cross stitch may face either direction but the most important rule is that all the top stitches should face the same direction!
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 31 x 20 stitches
Sewn Design Size: 2.2 x 1.4 inches or 56 x 36 mm
Suggested Material Size: 8.1 x 7.3 inches or 206 x 186 mm
Stitch Style: Cross-stitch Using 2 strands
Tension in your stitching is by far the easiest thing to correct, especially if you’re using a hoop – pull tight but not so tight that you stretch the hole at all. If you stitch in hand you have to be more careful.
I find that pulling the thread mostly through and then using my little finger in the hand holding the needle to “flick” the tail the final bit gives perfect tension and is reproducible for each stitch. Pay attention to the tension you’re applying as, if you stitch in different directions or do “patches” of stitching over the piece, you’ll pull it in weird directions.
In order to be able to download you need to be logged in. If you still not registered you can do it now.