'Nature' album
Fawn|724
times
11
Downloaded
Download
There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.
To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
Material Type: Aida Generic White
Sewing Count: 70/inch or 278/100mm
Design Size: 25 x 39 stitches
Sewn Design Size: 0.4 x 0.6 inches or 9 x 14 mm
Suggested Material Size: 6.3 x 6.5 inches or 159 x 164 mm
Stitch Style: Cross-stitch Using 1 strand
Sewing Count: 70/inch or 278/100mm
Design Size: 25 x 39 stitches
Sewn Design Size: 0.4 x 0.6 inches or 9 x 14 mm
Suggested Material Size: 6.3 x 6.5 inches or 159 x 164 mm
Stitch Style: Cross-stitch Using 1 strand
DMC Threads
Cross Stitch Calculator
25 x 39 stitches 6 colors
Download
Each square on a chart, both occupied and unoccupied, represents two threads of linen unless otherwise stated. Each occupied square equals one stitch unless otherwise stated.