Use a sharp pair of small scissors to avoid frayed ends on your floss. There are many embroidery scissors or thread clippers to choose from. The most useful size of embroidery scissor for cross stitch is probably 3/12 inch or 4 inch. It is a convenient size for snipping ends of floss while you stitch. Clip the floss with a small tail or with no tail at all. It’s a matter of choice. Beware of ends showing through the fabric. We have many fancy designer scissors and several more plain scissors to choose from. Some of my favorites are by Gingher and they are truly collectors items. They come in a variety of colorful handles and there are new ones every season. Right now the newest one is called Tessa. Store your scissors in the sheath that they come with or in a scissor block if you collect scissors. A scissor block is similar to a knife block.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 185 x 200 stitches
Sewn Design Size: 13.2 x 14.3 inches or 336 x 363 mm
Suggested Material Size: 19.1 x 20.2 inches or 486 x 513 mm
Stitch Style: Cross-stitch Using 2 strands
There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.
To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
In order to be able to download you need to be logged in. If you still not registered you can do it now.