There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.
To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
Material Type: Aida Generic Cream
Sewing Count: 14/inch or 55/100mm
Design Size: 17 x 17 stitches
Sewn Design Size: 1.2 x 1.2 inches or 31 x 31 mm
Suggested Material Size: 7.1 x 7.1 inches or 181 x 181 mm
Stitch Style: Cross-stitch Using 2 strands
When choosing supplies, purchase the best you can afford. Everything you choose does not have to be the most expensive, high-end model, but there are some supplies you should not skimp on. Floss and fabrics should be good quality, especially as you start to work on larger projects. Good scissors for cutting fabric and flosses are a must. Cross stitch does not have to be an expensive hobby, but if you are investing your time in creating an heirloom sampler, you will want to be sure that the supplies are of a quality that corresponds to your effort.
In order to be able to download you need to be logged in. If you still not registered you can do it now.