Ann Logan|Cross Stitch Patterns to Download|Border|2162


'Flowers' album



Border|2162

times 70 Downloaded
Download

There are lots of different styles of embroidery hoops and frames available. Whether you use one or not is up to you. Beginning stitchers may find it easier to put their fabric in an embroidery hoop.

To use a hoop, first loosen the screw and separate the two rounds. Place the round without the screw flat on a table or work surface. Lay the fabric over the hoop making sure the center of the fabric is in the center of the hoop. Place the other round over the fabric and press it down so the fabric is sandwiched between the two hoops. Gently pull the fabric taut as you tighten the screw on the hoop. Don’t pull the fabric too tight or it will distort the weave of the fabric.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 194 x 45 stitches
Sewn Design Size: 13.9 x 3.2 inches or 352 x 82 mm
Suggested Material Size: 19.8 x 9.1 inches or 502 x 232 mm
Stitch Style: Cross-stitch Using 2 strands

Border
DMC Threads
Cross Stitch Calculator
194 x 45 stitches 18 colors

Download
Cross stitching on Waste Canvas / soluble canvas.

This is a method of doing cross stitch on a particular type of fabric which will tear off after the work is done - this way you can cross stitch on any type of fabric, regardless of the fact that the eave is not prominent on the fabric. The way you do it is to keep the waste canvas on the garment and work the design. After the work is done, the waste canvas is pulled away thread by tread, after slightly wetting it. The work will remain on the garment. Soluble canvas will wash away when soaked in warm water.