Most designs supposed to be done using two strands of embroidery floss. But the floss is usually sold in six strand packaging.
So before threading your needle, you should separate all the 6 strands.
To do it just cut somewhat about 15”-18” (35 - 45 cm) of the thread. Hold it near the top with one hand allowing the bottom to untwist. Now pull each ply upward with the other hand. Carefully - one at a time.
Combine the necessary number of strands (typically two) and save the remaining for the next usage.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 134 x 94 stitches
Sewn Design Size: 9.6 x 6.7 inches or 243 x 171 mm
Suggested Material Size: 15.5 x 12.6 inches or 393 x 321 mm
Stitch Style: Cross-stitch Using 2 strands
This is a method of doing cross stitch on a particular type of fabric which will tear off after the work is done - this way you can cross stitch on any type of fabric, regardless of the fact that the eave is not prominent on the fabric. The way you do it is to keep the waste canvas on the garment and work the design. After the work is done, the waste canvas is pulled away thread by tread, after slightly wetting it. The work will remain on the garment. Soluble canvas will wash away when soaked in warm water.
In order to be able to download you need to be logged in. If you still not registered you can do it now.