Tension in your stitching is by far the easiest thing to correct, especially if you’re using a hoop – pull tight but not so tight that you stretch the hole at all. If you stitch in hand you have to be more careful.
I find that pulling the thread mostly through and then using my little finger in the hand holding the needle to “flick” the tail the final bit gives perfect tension and is reproducible for each stitch. Pay attention to the tension you’re applying as, if you stitch in different directions or do “patches” of stitching over the piece, you’ll pull it in weird directions.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 103 x 143 stitches
Sewn Design Size: 7.4 x 10.2 inches or 187 x 259 mm
Suggested Material Size: 13.3 x 16.1 inches or 337 x 409 mm
Stitch Style: Cross-stitch Using 2 strands
When choosing supplies, purchase the best you can afford. Everything you choose does not have to be the most expensive, high-end model, but there are some supplies you should not skimp on. Floss and fabrics should be good quality, especially as you start to work on larger projects. Good scissors for cutting fabric and flosses are a must. Cross stitch does not have to be an expensive hobby, but if you are investing your time in creating an heirloom sampler, you will want to be sure that the supplies are of a quality that corresponds to your effort.
In order to be able to download you need to be logged in. If you still not registered you can do it now.