Tension in your stitching is by far the easiest thing to correct, especially if you’re using a hoop – pull tight but not so tight that you stretch the hole at all. If you stitch in hand you have to be more careful.
I find that pulling the thread mostly through and then using my little finger in the hand holding the needle to “flick” the tail the final bit gives perfect tension and is reproducible for each stitch. Pay attention to the tension you’re applying as, if you stitch in different directions or do “patches” of stitching over the piece, you’ll pull it in weird directions.
Material Type: Aida Generic White
Sewing Count: 14/inch or 55/100mm
Design Size: 122 x 156 stitches
Sewn Design Size: 8.7 x 11.1 inches or 221 x 283 mm
Suggested Material Size: 14.6 x 17 inches or 371 x 433 mm
Stitch Style: Cross-stitch Using 2 strands
Try to buy all your threads for a specific cross-stitch project at once. Why? Because the embroidery thread is dyed in different dye lots. Hence even if you think that you get a specific color from a specific manufacturer, it can sometimes have a slightly different hue. Most times it is not that noticeable, but to be on the safe side, buy it all at once.
In order to be able to download you need to be logged in. If you still not registered you can do it now.